Shenzhen Hongda Electronic Co., Ltd.
ShenZhen Hongda Electronic Co., Ltd. HongKong Uranus Inv Co.,Ltd DMM Digital Multimeter , Digital Clamp Meter , Automotive Multimeter ,Insulation Resistance meter ......
Add to Cart
3 1/2 DC AC Voltage Current Ohm Cap DMM Digital Multimeter with Mechanical Protection
Quik Details
DC Voltage 200mV/2V/20V/200V/1000V
AC Voltage 200mV/2V/20V/200V/700V
DC Current 200uA/20mA/200MA/20A
AC Current 200uA/20mA/200MA/20A
Capacitance 2nF/20nF/200nF/2uF/200uF
Resistance 200Ω/2KΩ/20KΩ/200KΩ/2MΩ/20MΩ/200MΩ
Specification
|
Basic function |
Measurement range |
Basic accuracy |
|
DC voltage |
200mV/2V/20V/200V/1000V |
±(0.5%+3) |
|
AC voltage |
200mV/2V/20V/200V/700V |
±(0.8%+3) |
|
DC current |
200µA/20mA/200mA/20A |
±(1.2%+2) |
|
AC current |
200µA/20mA/200mA/20A |
±(1.8%+3) |
|
Resistance |
200Ω/2kΩ/20kΩ/200kΩ/2MΩ/20MΩ |
±(1.0%+5) |
|
Capacitance |
2 nF /20 nF/200 nF/2Uf/200uF |
±(4.0%+5) |
|
Frequency |
2KHz-20KHz ±(2.0%+5) | |
|
Temperature |
-40C-1000C ±(1.5%+15) | |
|
hFE test |
V |
|
|
Diode test |
V |
|
|
Continuity buzzer |
V |
|
|
Low power display |
V |
|
|
Auto power off |
V |
|
|
Data hold |
V |
|
|
Backlight |
V |
|
|
Maximum display |
1999 |
|
General Characteristic
Power supply : 9V(6F 22)
Color : Ron-Gray + Red
Weight : 780g(including batteries)
Dimension : 205*100*60mm
Accessories : Test lead ,manual ,battery
Standard inner package : Color box
Standard package quality : 30 sets
Outer packing size :47*37*48cm
Standard packing gross weight :24.5kg
HD2101B is a precise electronic multimeter. Please take care to do the maintenance well.
1). Don’t connect it to the voltage over 1000 DC V or 700 AC V.
2). Don’t forget to pull out the test lead before turning the function/range switch so as not to
damage the mechanical protection system.
3). Don’t use the meter before replacing the back cover of it.
4). Battery replacement: Pull out the test lead and turn off the power before replacing the battery.
Remove the battery screws and then detach the battery cover. Remove the battery and
replace it according to the specifications.
5). Fuse replacement: Press the Off key to turn off the instrument, and disconnect the test leads
from the input terminals. Remove the back cover screws and open the back cover. Replace
the fuse/fuses with new of the same type and rating: 0.2A / 250V.
7). Remove the battery and put it in a dry and airy place if the meter is not used for a long time.
8). Don’t change the inner circuit at will so as not to damage the meter.
Product Pictures